Skip to content
Fault code dictionary (DTC)

P24DA — Particulate sensor exhaust sample error, bank 1

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe bank 1 particulate matter sensor measures soot in the exhaust gas, and the control unit detected an error in the sample the sensor is reading. The code says the data is not as expected, but does not say by itself whether the problem is in the sensor or in the exhaust. The exact meaning may vary by manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Particulate filter warning or light
Abnormal filter regenerations
Possible power reduction on some models
Often no obvious driving symptoms

Common causes

Dirty or faulty particulate matter sensor
Damaged or cracked particulate filter
Exhaust leak near the sensor
Sensor wiring or connector problem
Sensor fitted wrongly or loose (less common)

What to do

Have the sensor data read and the exhaust around the filter and sensor checked for leaks. It is best to act within a reasonable time, because if the filter is damaged emissions can increase.

How to read code P24DA

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P24DA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (DA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P24DA mean?

Particulate sensor exhaust sample error, bank 1. The bank 1 particulate matter sensor measures soot in the exhaust gas, and the control unit detected an error in the sample the sensor is reading. The code says the data is not as expected, but does not say by itself whether the problem is in the sensor or in the exhaust. The exact meaning may vary by manufacturer.

Can I keep driving with code P24DA active?

With caution: limp mode possible, have it checked soon

Common causes — P24DA

Dirty or faulty particulate matter sensor Damaged or cracked particulate filter Exhaust leak near the sensor Sensor wiring or connector problem Sensor fitted wrongly or loose (less common)

How do you fix code P24DA?

Have the sensor data read and the exhaust around the filter and sensor checked for leaks. It is best to act within a reasonable time, because if the filter is damaged emissions can increase.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes