Skip to content
Fault code dictionary (DTC)

P24FF — Reductant temperature too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module found that the AdBlue (the fluid used by the SCR system) is above its permitted temperature. Fluid that is too hot breaks down and can damage the dosing system, and the system may reduce or stop dosing as a protection. Sometimes the cause is simply very hot weather.
FamilyPowertrain (P)

Typical symptoms

Check engine light or AdBlue warning light on
Emissions system fault message
Reduced or suspended AdBlue dosing
High temperatures after parking in the sun or long climbs
No obvious driving symptoms

Common causes

Very hot outside weather or long parking in the sun
Tank or lines too close to exhaust heat sources
Tank heater staying on
Faulty tank temperature sensor
Fault in the AdBlue delivery module

What to do

If the code only appears after very hot weather, see whether it returns at normal temperatures. If it stays, have the sensor, the tank heater and the heat shielding checked. Don't ignore it for long, because on many vehicles an unresolved SCR problem can restrict starting.

How to read code P24FF

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P24FF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (FF) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P24FF mean?

Reductant temperature too high. The control module found that the AdBlue (the fluid used by the SCR system) is above its permitted temperature. Fluid that is too hot breaks down and can damage the dosing system, and the system may reduce or stop dosing as a protection. Sometimes the cause is simply very hot weather.

Can I keep driving with code P24FF active?

With caution: limp mode possible, have it checked soon

Common causes — P24FF

Very hot outside weather or long parking in the sun Tank or lines too close to exhaust heat sources Tank heater staying on Faulty tank temperature sensor Fault in the AdBlue delivery module

How do you fix code P24FF?

If the code only appears after very hot weather, see whether it returns at normal temperatures. If it stays, have the sensor, the tank heater and the heat shielding checked. Don't ignore it for long, because on many vehicles an unresolved SCR problem can restrict starting.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes