P258B — Vacuum pump A control circuit range/performance
| Meaning | The control unit found that the control circuit of vacuum pump A is not behaving as expected. The signal is there, but not within the expected values. The available vacuum may be insufficient. |
| Family | Powertrain (P) |
Typical symptoms
Hard or poorly assisted brake pedal
Insufficient vacuum for the brake booster
Noisy pump or one that runs constantly
Weak vacuum-operated functions
Common causes
Leaks in the hoses or brake booster
Connector or wiring with abnormal resistance
Check valve defective
Control unit fault (rare)
What to do
How to read code P258B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P258B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (8B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P258B mean?
Vacuum pump A control circuit range/performance. The control unit found that the control circuit of vacuum pump A is not behaving as expected. The signal is there, but not within the expected values. The available vacuum may be insufficient.
Can I keep driving with code P258B active?
With caution: limp mode possible, have it checked soon
Common causes — P258B
Vacuum pump worn or with reduced output Leaks in the hoses or brake booster Connector or wiring with abnormal resistance Check valve defective Control unit fault (rare)
How do you fix code P258B?
Have the pump, vacuum hoses and check valve inspected. If the brakes feel less assisted, get it checked soon: safety comes first.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P258A — Vacuum pump A control circuit open
- Next code: P258C — Vacuum pump A control circuit voltage too low
Related codes
- P2500 — Generator lamp / L-terminal circuit low
- P2501 — Generator lamp / L-terminal circuit high
- P2502 — Charging system voltage out of range
- P2503 — Charging system voltage too low
- P2504 — Charging system voltage too high
- P2505 — Engine control unit power input signal fault
- P2506 — Control unit power input signal out of range
- P2507 — Control unit power input signal too low
- P2508 — Control unit power input signal too high
- P2509 — Control unit power input signal intermittent
- P250A — Engine oil level sensor circuit fault
- P250B — Engine oil level sensor range/performance fault