U042C — Invalid data from chassis control module B
| Meaning | A control unit received a message from chassis control module B containing invalid or inconsistent data. Communication is taking place, but the content is not believable. What module "B" actually is is decided by the manufacturer: without knowing the brand I cannot tell you for sure which unit it refers to. |
| Family | Network (U) |
Typical symptoms
Stability or traction control unavailable
Error messages on the dashboard
Assistance functions switching off on their own
Irregular suspension or steering behavior, if fitted
Common causes
Module connector with corroded or loose contacts
Internal fault in chassis control module B
A connected sensor sending wrong data
Module software needing an update
Damaged communication network wiring
What to do
How to read code U042C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U042C starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U042C mean?
Invalid data from chassis control module B. A control unit received a message from chassis control module B containing invalid or inconsistent data. Communication is taking place, but the content is not believable. What module "B" actually is is decided by the manufacturer: without knowing the brand I cannot tell you for sure which unit it refers to.
Can I keep driving with code U042C active?
With caution: limp mode possible, have it checked soon
Common causes — U042C
Weak battery or unstable supply voltage Module connector with corroded or loose contacts Internal fault in chassis control module B A connected sensor sending wrong data Module software needing an update Damaged communication network wiring
How do you fix code U042C?
Start with the battery and ground connections, then visually check the module's connectors. Also read the other stored codes and look for the one that appeared first. If safety systems are disabled, avoid spirited driving and have the car checked as soon as possible.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U042B — Invalid data from chassis control module A
- Next code: U042D — Invalid data from active vibration control module
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A