U042D — Invalid data from active vibration control module
| Meaning | The control unit received invalid data from the active vibration control module, the system that dampens engine or body vibrations. The module is communicating, but the values it sends make no sense to the control unit. This system is not fitted to every car and how it works depends on the manufacturer. |
| Family | Network (U) |
Typical symptoms
Engine shaking felt in the cabin
Warning light on
More noise than usual at certain engine speeds
Error messages on the dashboard
Common causes
Faulty module connector or wiring
Internal fault in the vibration control module
Faulty active engine mount or actuator
Outdated module software
What to do
How to read code U042D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U042D starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U042D mean?
Invalid data from active vibration control module. The control unit received invalid data from the active vibration control module, the system that dampens engine or body vibrations. The module is communicating, but the values it sends make no sense to the control unit. This system is not fitted to every car and how it works depends on the manufacturer.
Can I keep driving with code U042D active?
With caution: limp mode possible, have it checked soon
Common causes — U042D
Low or unstable supply voltage Faulty module connector or wiring Internal fault in the vibration control module Faulty active engine mount or actuator Outdated module software
How do you fix code U042D?
Check the battery and the module connector first. Then read the other stored codes and check the condition of the engine mounts. It is usually not an emergency, but strong vibration over time wears other parts, so do not put the check off for too long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U042C — Invalid data from chassis control module B
- Next code: U042E — Invalid data from generator A control module
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A