Skip to content
Fault code dictionary (DTC)

U042E — Invalid data from generator A control module

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit received invalid data from the module that manages generator A, usually the alternator or another generator in the electrical system. The communication link works, but the information received is inconsistent. The exact meaning of "generator A" depends on the manufacturer; on hybrid systems, for example, it may not be the usual alternator.
FamilyNetwork (U)

Typical symptoms

Battery or charging warning light on
Battery draining faster than normal
Headlights changing in brightness
Electrical functions switching off or behaving oddly
Hard starting after the car has been parked
Error messages about the electrical system

Common causes

Battery in poor condition or dirty terminals
Alternator with a faulty regulator
Generator wiring or connector with poor contact
Slipping or worn drive belt
Fault in the generator control module
Problem on the communication line

What to do

Have the battery, terminals and charging voltage with the engine running checked first. If the charging light is on or the battery is going flat, do not travel far from home or a workshop: the car can stop once the battery runs out.

How to read code U042E

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code U042E starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U042E mean?

Invalid data from generator A control module. The control unit received invalid data from the module that manages generator A, usually the alternator or another generator in the electrical system. The communication link works, but the information received is inconsistent. The exact meaning of "generator A" depends on the manufacturer; on hybrid systems, for example, it may not be the usual alternator.

Can I keep driving with code U042E active?

With caution: limp mode possible, have it checked soon

Common causes — U042E

Battery in poor condition or dirty terminals Alternator with a faulty regulator Generator wiring or connector with poor contact Slipping or worn drive belt Fault in the generator control module Problem on the communication line

How do you fix code U042E?

Have the battery, terminals and charging voltage with the engine running checked first. If the charging light is on or the battery is going flat, do not travel far from home or a workshop: the car can stop once the battery runs out.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes