Skip to content
Fault code dictionary (DTC)

U043D — Invalid data from accelerator pedal module

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit received invalid or inconsistent data from the accelerator pedal module about the pedal position. The module is communicating, but the values are not believable. Because the pedal tells the engine how much power to deliver, the control unit may limit the response for safety.
FamilyNetwork (U)

Typical symptoms

Engine light on
Engine not responding well to the throttle
Limited power or limp mode
High or uneven idle
Jerky or delayed acceleration
Cruise control unavailable

Common causes

Pedal connector corroded or loose
Worn or faulty pedal sensor
Damaged wiring between pedal and control unit
Low or unstable supply voltage
Internal fault in the pedal module
Problem on the communication network

What to do

Check the pedal connector and the battery, then read the other engine codes. If the throttle response is abnormal or the engine goes into reduced power, do not push on in fast traffic: have the car checked as soon as possible.

How to read code U043D

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code U043D starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U043D mean?

Invalid data from accelerator pedal module. The control unit received invalid or inconsistent data from the accelerator pedal module about the pedal position. The module is communicating, but the values are not believable. Because the pedal tells the engine how much power to deliver, the control unit may limit the response for safety.

Can I keep driving with code U043D active?

With caution: limp mode possible, have it checked soon

Common causes — U043D

Pedal connector corroded or loose Worn or faulty pedal sensor Damaged wiring between pedal and control unit Low or unstable supply voltage Internal fault in the pedal module Problem on the communication network

How do you fix code U043D?

Check the pedal connector and the battery, then read the other engine codes. If the throttle response is abnormal or the engine goes into reduced power, do not push on in fast traffic: have the car checked as soon as possible.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes