U0440 — Invalid data from the pedestrian alert module
| Meaning | The control unit that stored this code received incorrect data over the car's communication network from the module that handles the pedestrian alert. On hybrid and electric cars this is usually the system that makes a warning sound at low speed. The exact meaning of the module depends on the make and model. The code points to a communication or data problem and does not say by itself which part has failed. |
| Family | Network (U) |
Typical symptoms
Pedestrian warning sound missing or different from usual at low speed
Error message on the dashboard about driver assistance systems
Other communication codes stored together with this one
Related functions behaving oddly or switching off
Common causes
Weak or flat 12 V battery, with voltage dropping while starting
Poor ground connection at the module
Outdated software in the module or control unit
Faulty pedestrian alert module
Interference on the network caused by another failing module
What to do
How to read code U0440
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0440 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0440 mean?
Invalid data from the pedestrian alert module. The control unit that stored this code received incorrect data over the car's communication network from the module that handles the pedestrian alert. On hybrid and electric cars this is usually the system that makes a warning sound at low speed. The exact meaning of the module depends on the make and model. The code points to a communication or data problem and does not say by itself which part has failed.
Can I keep driving with code U0440 active?
With caution: limp mode possible, have it checked soon
Common causes — U0440
Module connector or wiring corroded, loose or damaged Weak or flat 12 V battery, with voltage dropping while starting Poor ground connection at the module Outdated software in the module or control unit Faulty pedestrian alert module Interference on the network caused by another failing module
How do you fix code U0440?
First check the condition of the 12 V battery and the connectors of the module involved. After that you need a diagnosis with a tool suited to your make, to read the live data and any other stored codes. It won't stop the car right away, but the pedestrian warning system should be checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U043F — Invalid Data Received From Suspension Control Modu...
- Next code: U0441 — Invalid Data Received from Brake System Control Mo...
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A