U0441 — Invalid Data Received from Brake System Control Module
| Meaning | The engine computer or another main control unit has received implausible or corrupted data from the brake system module over the vehicle communication network. This means the modules are not talking to each other correctly, usually due to a CAN bus communication glitch or a software conflict. |
| Family | Network (U) |
Typical symptoms
Some driver assistance features temporarily disabled
Unusual behavior in the instrument cluster
Common causes
Software glitch in the brake control module or main computer
Low battery voltage during vehicle start-up affecting module communication
Faulty wiring or loose connector at the brake control module
What to do
How to read code U0441
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0441 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0441 mean?
Invalid Data Received from Brake System Control Module. The engine computer or another main control unit has received implausible or corrupted data from the brake system module over the vehicle communication network. This means the modules are not talking to each other correctly, usually due to a CAN bus communication glitch or a software conflict.
Can I keep driving with code U0441 active?
With caution: limp mode possible, have it checked soon
Common causes — U0441
Intermittent CAN bus network communication error Software glitch in the brake control module or main computer Low battery voltage during vehicle start-up affecting module communication Faulty wiring or loose connector at the brake control module
How do you fix code U0441?
Have a technician scan the entire network to check for related communication codes and verify battery health first. Address this soon, as safety systems like ABS may not function properly until the data link is restored.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0440 — Invalid data from the pedestrian alert module
- Next code: U0442 — Invalid data received from body control module
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A