U0442 — Invalid data received from body control module
| Meaning | The engine computer expected specific information from the body control module over the data network, but the message arrived corrupted or made no sense. Because this is a standard SAE network code, the exact meaning depends heavily on the specific vehicle manufacturer and model wiring architecture. |
| Family | Network (U) |
Typical symptoms
Warning lights on the instrument cluster
Erratic behavior from convenience features like power windows or door locks
Common causes
CAN bus network communication interference or wiring damage
Software glitch or internal failure within the body control module
What to do
How to read code U0442
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0442 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0442 mean?
Invalid data received from body control module. The engine computer expected specific information from the body control module over the data network, but the message arrived corrupted or made no sense. Because this is a standard SAE network code, the exact meaning depends heavily on the specific vehicle manufacturer and model wiring architecture.
Can I keep driving with code U0442 active?
With caution: limp mode possible, have it checked soon
Common causes — U0442
Poor connection or corrosion at the body control module wiring plug CAN bus network communication interference or wiring damage Software glitch or internal failure within the body control module
How do you fix code U0442?
Check the battery voltage and ensure all main ground connections are clean and secure, as low voltage often triggers network errors. Have a technician scan all vehicle modules to see which specific unit failed to communicate correctly.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0441 — Invalid Data Received from Brake System Control Mo...
- Next code: U0443 — Invalid data received from alternator control modu...
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A