U0444 — Invalid Data Received From Body Control Module
| Meaning | The engine computer or another control unit has received confusing or garbled data over the vehicle's internal network from the body control module. Because the modules cannot understand each other properly, certain comfort or body-related functions may not operate as intended. |
| Family | Network (U) |
Typical symptoms
Warning messages on the instrument cluster
Features like power windows, locks, or lighting behaving intermittently
Common causes
Communication bus wiring damaged or having a loose pin
A software glitch or internal fault inside the body control module itself
What to do
How to read code U0444
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0444 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0444 mean?
Invalid Data Received From Body Control Module. The engine computer or another control unit has received confusing or garbled data over the vehicle's internal network from the body control module. Because the modules cannot understand each other properly, certain comfort or body-related functions may not operate as intended.
Can I keep driving with code U0444 active?
With caution: limp mode possible, have it checked soon
Common causes — U0444
Poor electrical connection or corrosion at the body control module plug Communication bus wiring damaged or having a loose pin A software glitch or internal fault inside the body control module itself
How do you fix code U0444?
It is best to check the vehicle battery state of health first, as low voltage often triggers network communication faults. Have a technician inspect the wiring harnesses and module connectors for physical damage or moisture intrusion soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0443 — Invalid data received from alternator control modu...
- Next code: U0445 — Invalid Data Received from Fuel Pump Control Modul...
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A