U0445 — Invalid Data Received from Fuel Pump Control Module
| Meaning | Your car's main computer detected invalid or missing data coming specifically from the fuel pump control module over the internal communication network. This means the computer cannot properly understand the messages sent by the fuel pump module, which can affect engine performance. |
| Family | Network (U) |
Typical symptoms
Engine running rough or hesitating under load
Check Engine light illuminated on the dashboard
Common causes
Faulty fuel pump control module itself
Wiring harness damage or pin issues in the communication network
What to do
How to read code U0445
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0445 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0445 mean?
Invalid Data Received from Fuel Pump Control Module. Your car's main computer detected invalid or missing data coming specifically from the fuel pump control module over the internal communication network. This means the computer cannot properly understand the messages sent by the fuel pump module, which can affect engine performance.
Can I keep driving with code U0445 active?
With caution: limp mode possible, have it checked soon
Common causes — U0445
Poor electrical connection or corrosion at the fuel pump control module plug Faulty fuel pump control module itself Wiring harness damage or pin issues in the communication network
How do you fix code U0445?
Have a technician check the wiring and plugs connected to the fuel pump control module for corrosion or loose pins. It is best to address this promptly to avoid unexpected engine stalling while driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0444 — Invalid Data Received From Body Control Module
- Next code: U0446 — Invalid Data Received From EVTM
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A