Skip to content
Fault code dictionary (DTC)

U0446 — Invalid Data Received From EVTM

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer has received implausible or corrupted data from the Evaporative Emission System module over the vehicle network. This means the main computer cannot trust the signals coming from that specific control unit.
FamilyNetwork (U)

Typical symptoms

Check Engine light is on
Emission control system warning
Possible related issues with fuel vapor system operation

Common causes

Communication glitch or temporary data corruption on the CAN bus network
Wiring harness or connector damage between control modules
Software glitch in the engine computer or the evaporative emission module
Failing Evaporative Emission System module

What to do

Have a technician scan the full network for communication codes and check the wiring harness integrity. It is not an immediate roadside breakdown risk, but it should be checked soon to ensure proper vehicle communication.

How to read code U0446

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code U0446 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0446 mean?

Invalid Data Received From EVTM. The engine computer has received implausible or corrupted data from the Evaporative Emission System module over the vehicle network. This means the main computer cannot trust the signals coming from that specific control unit.

Can I keep driving with code U0446 active?

With caution: limp mode possible, have it checked soon

Common causes — U0446

Communication glitch or temporary data corruption on the CAN bus network Wiring harness or connector damage between control modules Software glitch in the engine computer or the evaporative emission module Failing Evaporative Emission System module

How do you fix code U0446?

Have a technician scan the full network for communication codes and check the wiring harness integrity. It is not an immediate roadside breakdown risk, but it should be checked soon to ensure proper vehicle communication.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes