U044B — Invalid Data Received From Actuator
| Meaning | Your car's computer has received implausible or corrupted data from a specific system module on the network. Because this is a standardized network code defined by SAE, the exact component involved depends heavily on your vehicle's specific make and model configuration. |
| Family | Network (U) |
Typical symptoms
Certain electronic features or accessories not working correctly
Possible entry into a restricted operating mode
Common causes
Faulty wiring harness or damaged connector leading to the affected control module
Software glitch or outdated firmware in one of the control units
Internal failure within the sending control module
What to do
How to read code U044B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U044B starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U044B mean?
Invalid Data Received From Actuator. Your car's computer has received implausible or corrupted data from a specific system module on the network. Because this is a standardized network code defined by SAE, the exact component involved depends heavily on your vehicle's specific make and model configuration.
Can I keep driving with code U044B active?
With caution: limp mode possible, have it checked soon
Common causes — U044B
Temporary communication glitch on the vehicle data network Faulty wiring harness or damaged connector leading to the affected control module Software glitch or outdated firmware in one of the control units Internal failure within the sending control module
How do you fix code U044B?
It is best to have a diagnostic scan performed to identify which specific module sent the invalid data. Check the vehicle battery and charging system first, as low voltage frequently triggers network communication codes.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U044A — Invalid Data Received From Powertrain Actuator Con...
- Next code: U044C — Invalid Data Received From Restraint Control Modul...
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A