U044C — Invalid Data Received From Restraint Control Module
| Meaning | The engine computer or main network has received implausible or corrupted data from the vehicle's restraint control module, which manages airbags and safety systems. Because this is a standardized network code, the exact triggering condition depends heavily on the specific vehicle manufacturer's communication architecture. |
| Family | Network (U) |
Typical symptoms
Certain safety or restraint features may be temporarily disabled
Common causes
Loose, corroded, or damaged wiring harness or connector at the restraint control module
Internal failure or software issue within the restraint control module
What to do
How to read code U044C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U044C starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U044C mean?
Invalid Data Received From Restraint Control Module. The engine computer or main network has received implausible or corrupted data from the vehicle's restraint control module, which manages airbags and safety systems. Because this is a standardized network code, the exact triggering condition depends heavily on the specific vehicle manufacturer's communication architecture.
Can I keep driving with code U044C active?
With caution: limp mode possible, have it checked soon
Common causes — U044C
Communication glitch or temporary data packet loss on the CAN bus network Loose, corroded, or damaged wiring harness or connector at the restraint control module Internal failure or software issue within the restraint control module
How do you fix code U044C?
You should have a technician scan the entire network to check for related communication codes and inspect the wiring harness connected to the airbag module. Prompt attention is recommended because this involves the vehicle safety systems.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U044B — Invalid Data Received From Actuator
- Next code: U044D — Invalid Data Received From Actuator Module
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A