U0454 — Invalid data from right side restraint module
| Meaning | The control unit that logged this fault received a message over the vehicle's communication network from the right side restraint module (the right-hand side airbags and belt pretensioners), but the data was nonsensical or incomplete. The module is not necessarily dead: it is talking, but the control unit cannot make sense of what it says. The airbag warning light usually comes on. |
| Family | Network (U) |
Typical symptoms
Safety or restraint system fault messages
Other lights coming on together, such as ABS or stability control
Passive safety functions reduced or disabled by the control unit
Sometimes no obvious symptom besides the light
Common causes
Oxidized or loose connector on the side airbag module or wiring under the seat
Low or unstable battery voltage disturbing communication
Faulty right side restraint module or incorrect software
Another module on the network disturbing communication
What to do
How to read code U0454
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0454 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0454 mean?
Invalid data from right side restraint module. The control unit that logged this fault received a message over the vehicle's communication network from the right side restraint module (the right-hand side airbags and belt pretensioners), but the data was nonsensical or incomplete. The module is not necessarily dead: it is talking, but the control unit cannot make sense of what it says. The airbag warning light usually comes on.
Can I keep driving with code U0454 active?
With caution: limp mode possible, have it checked soon
Common causes — U0454
Momentary disturbance or interruption on the CAN communication line Oxidized or loose connector on the side airbag module or wiring under the seat Low or unstable battery voltage disturbing communication Faulty right side restraint module or incorrect software Another module on the network disturbing communication
How do you fix code U0454?
Have all codes read from all control units, not just the engine one, because this fault often comes from a wider network problem. Check the battery and the right-hand side connectors. Take it seriously: while the airbag light is on, you cannot rely on the system working in a crash. Do not disassemble airbag components yourself.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0453 — Invalid Data Received From Four Wheel Drive Contro...
- Next code: U0455 — Invalid data from occupant classification system
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A