U0455 — Invalid data from occupant classification system
| Meaning | The control unit received a message with invalid data from the module that detects who is sitting in a seat (usually the passenger seat). This module helps decide whether and how the passenger airbag should deploy. If its data cannot be trusted, the system may play it safe and switch the airbag off. |
| Family | Network (U) |
Typical symptoms
Passenger airbag off indicator even with someone seated
Passenger airbag shown as active with an empty seat
Restraint system fault messages
No symptom besides the light
Common causes
Temporary disturbance on the communication network
Faulty weight sensor or classification module
Heavy objects or liquids on the seat distorting the reading
Low or unstable battery voltage
What to do
How to read code U0455
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0455 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0455 mean?
Invalid data from occupant classification system. The control unit received a message with invalid data from the module that detects who is sitting in a seat (usually the passenger seat). This module helps decide whether and how the passenger airbag should deploy. If its data cannot be trusted, the system may play it safe and switch the airbag off.
Can I keep driving with code U0455 active?
With caution: limp mode possible, have it checked soon
Common causes — U0455
Loose or oxidized sensor connector under the passenger seat, often after moving the seat or cleaning underneath Temporary disturbance on the communication network Faulty weight sensor or classification module Heavy objects or liquids on the seat distorting the reading Low or unstable battery voltage
How do you fix code U0455?
First check that nothing heavy or wet is on the seat and that the connectors under it are firmly plugged in, without taking apart any airbag parts. Then have the codes read with a suitable tool. Do not ignore it: the system may not protect the passenger correctly in a crash.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0454 — Invalid data from right side restraint module
- Next code: U0456 — Invalid data from coolant temperature control modu...
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A