U0457 — Invalid data from information center A
| Meaning | A control unit received a message with invalid data from information center A (the instrument cluster or driver display). The letter A tells it apart from a second cluster, and which one that is on your car is set by the manufacturer: I cannot say for certain without knowing the make. The fault concerns communication, not necessarily the display itself. |
| Family | Network (U) |
Typical symptoms
Warning lights all coming on or flashing
Strange messages on the display
Odometer or gauges not responding
No symptom besides the stored code
Common causes
Loose or oxidized connector behind the cluster
Weak battery or unstable voltage
Faulty instrument cluster or outdated software
Another module on the network disturbing communication
What to do
How to read code U0457
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0457 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0457 mean?
Invalid data from information center A. A control unit received a message with invalid data from information center A (the instrument cluster or driver display). The letter A tells it apart from a second cluster, and which one that is on your car is set by the manufacturer: I cannot say for certain without knowing the make. The fault concerns communication, not necessarily the display itself.
Can I keep driving with code U0457 active?
With caution: limp mode possible, have it checked soon
Common causes — U0457
Temporary disturbance on the communication line Loose or oxidized connector behind the cluster Weak battery or unstable voltage Faulty instrument cluster or outdated software Another module on the network disturbing communication
How do you fix code U0457?
Check the battery condition and whether the cluster shows obvious problems. Have the codes read from all control units, because a network problem usually leaves more than one. If the cluster works normally, urgency is low, but do not put it off too long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0456 — Invalid data from coolant temperature control modu...
- Next code: U0458 — Invalid data from information center B
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A