U0458 — Invalid data from information center B
| Meaning | A control unit received a message with invalid data from a second information center (labeled "B", for example an additional display). Which physical module this is depends on the manufacturer, and I cannot say for sure without knowing the make. The code points to a communication problem or to the content of the message. |
| Family | Network (U) |
Typical symptoms
Abnormal messages on the screen
Some on-board information missing or inconsistent
Warning lights on for no apparent reason
No symptom in mild cases
Common causes
Loose or oxidized connector on the display or module
Weak battery or unstable voltage
Faulty display module or outdated software
Another module on the network disturbing communication
What to do
How to read code U0458
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0458 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0458 mean?
Invalid data from information center B. A control unit received a message with invalid data from a second information center (labeled "B", for example an additional display). Which physical module this is depends on the manufacturer, and I cannot say for sure without knowing the make. The code points to a communication problem or to the content of the message.
Can I keep driving with code U0458 active?
With caution: limp mode possible, have it checked soon
Common causes — U0458
Temporary disturbance on the communication line Loose or oxidized connector on the display or module Weak battery or unstable voltage Faulty display module or outdated software Another module on the network disturbing communication
How do you fix code U0458?
Check the battery and whether the secondary display shows visible problems. Have the codes read from all control units to see whether the problem is isolated or network-wide. It is usually not urgent, but have it checked within a reasonable time.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0457 — Invalid data from information center A
- Next code: U0459 — Invalid data from head-up display
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A