U046D — Invalid data from fuel pump control module B
| Meaning | A control unit received inconsistent data from the second fuel pump control module, labelled B. Which pump B is exactly depends on the manufacturer: often a second pump or the high-pressure one. Since the pump is essential for the engine to run, this should be taken seriously. |
| Family | Network (U) |
Typical symptoms
Loss of power, especially under load
Engine light on
Jerking or hesitation when accelerating
Other codes about the pump or fuel supply
Common causes
Low voltage or a poor battery
Failed pump control module
Blown fuse or relay in the pump supply
Failing fuel pump disturbing the module
Engine control unit software needing an update
What to do
How to read code U046D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U046D starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U046D mean?
Invalid data from fuel pump control module B. A control unit received inconsistent data from the second fuel pump control module, labelled B. Which pump B is exactly depends on the manufacturer: often a second pump or the high-pressure one. Since the pump is essential for the engine to run, this should be taken seriously.
Can I keep driving with code U046D active?
With caution: limp mode possible, have it checked soon
Common causes — U046D
Corroded or loose pump module connector or wiring Low voltage or a poor battery Failed pump control module Blown fuse or relay in the pump supply Failing fuel pump disturbing the module Engine control unit software needing an update
How do you fix code U046D?
Have the car checked soon: if the pump stops working the engine can cut out while driving, which is risky when overtaking or in traffic. Until then avoid demanding or long trips.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U046C — Invalid data from A/C compressor control module
- Next code: U046E — Invalid data from exhaust gas sensor module B
Related codes
- U0400 — Invalid Data Received
- U0401 — Invalid Data Received From ECM/PCM
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A