U046E — Invalid data from exhaust gas sensor module B
| Meaning | A control unit received inconsistent data from the second module that handles the exhaust gas sensors (such as the oxygen sensor or NOx sensors), labelled B. B often means the other bank or the second sensor, but it depends on the manufacturer. Without reliable data the control unit may manage the mixture and emissions poorly. |
| Family | Network (U) |
Typical symptoms
Higher fuel use or uneven engine running
Emissions out of limits at inspection
Unstable idle or slight hesitation
Particulate filter or AdBlue messages on some diesels
Common causes
Faulty exhaust gas sensor or module
Low supply voltage
Exhaust leaks distorting the data
Engine control unit software needing an update
Another faulty network module
What to do
How to read code U046E
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U046E starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U046E mean?
Invalid data from exhaust gas sensor module B. A control unit received inconsistent data from the second module that handles the exhaust gas sensors (such as the oxygen sensor or NOx sensors), labelled B. B often means the other bank or the second sensor, but it depends on the manufacturer. Without reliable data the control unit may manage the mixture and emissions poorly.
Can I keep driving with code U046E active?
With caution: limp mode possible, have it checked soon
Common causes — U046E
Damaged or heat-exposed sensor module wiring or connector Faulty exhaust gas sensor or module Low supply voltage Exhaust leaks distorting the data Engine control unit software needing an update Another faulty network module
How do you fix code U046E?
This will not stop the car straight away, but do not ignore it for long, since engine management and the catalytic converter can suffer. Have the sensor data read at a workshop and check the wiring and exhaust.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U046D — Invalid data from fuel pump control module B
- Next code: U0471 — Invalid data from restraints system sensor A
Related codes
- U0400 — Invalid Data Received
- U0401 — Invalid Data Received From ECM/PCM
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A