Skip to content
Fault code dictionary (DTC)

B1425 — Rear right window motor circuit shorted to ground

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detected that the rear right window motor circuit is in contact with ground. This code is defined by the manufacturer, so the exact criteria may vary. The motor normally cannot run.
FamilyBody (B)

Typical symptoms

The rear right window is stuck
The window fuse blows
No noise from the motor
The other windows work
The fault appeared after water got in

Common causes

Wire with damaged insulation touching the metal
Shorted window motor
Wet connector
Jammed mechanism overloading the motor
Faulty output in the control module

What to do

Inspect the boot between the door and the pillar and the connector in the rear right door. Do not fit a larger fuse. It does not affect driving safety but it is best not to postpone it.

How to read code B1425

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1425 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1425 mean?

Rear right window motor circuit shorted to ground. The control module detected that the rear right window motor circuit is in contact with ground. This code is defined by the manufacturer, so the exact criteria may vary. The motor normally cannot run.

Can I keep driving with code B1425 active?

With caution: limp mode possible, have it checked soon

Common causes — B1425

Wire with damaged insulation touching the metal Shorted window motor Wet connector Jammed mechanism overloading the motor Faulty output in the control module

How do you fix code B1425?

Inspect the boot between the door and the pillar and the connector in the rear right door. Do not fit a larger fuse. It does not affect driving safety but it is best not to postpone it.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes