Skip to content
Fault code dictionary (DTC)

B1459 — Washer pump relay coil circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningCode B1459 is manufacturer-defined and I have no reliable information on how each brand uses it. The reference definition points to an open circuit on the washer pump relay coil. The module commands the relay but does not find the electrical continuity it expects.
FamilyBody (B)

Typical symptoms

Washer does not spray at all
No click from the relay when the control is operated
Wipers working normally
Body fault warning light in some cases

Common causes

Broken relay control wire
Disconnected or corroded connector
Open relay coil
Relay not seated properly in its socket
Internal fault in the body control module

What to do

Check that the relay is firmly seated and the connectors are not corroded. The fault only removes the washer, so it is not a safety urgency, but it is worth fixing soon if roads are dirty.

How to read code B1459

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1459 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1459 mean?

Washer pump relay coil circuit open. Code B1459 is manufacturer-defined and I have no reliable information on how each brand uses it. The reference definition points to an open circuit on the washer pump relay coil. The module commands the relay but does not find the electrical continuity it expects.

Can I keep driving with code B1459 active?

With caution: limp mode possible, have it checked soon

Common causes — B1459

Broken relay control wire Disconnected or corroded connector Open relay coil Relay not seated properly in its socket Internal fault in the body control module

How do you fix code B1459?

Check that the relay is firmly seated and the connectors are not corroded. The fault only removes the washer, so it is not a safety urgency, but it is worth fixing soon if roads are dirty.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes