Skip to content
Fault code dictionary (DTC)

B1462 — Seat belt switch circuit failure

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningCode B1462 is manufacturer-defined and I have no reliable information on how each brand uses it. The reference definition points to a general failure in the seat belt switch circuit (the contact that reports whether the belt is fastened). The module receives an inconsistent signal from this contact.
FamilyBody (B)

Typical symptoms

Belt warning light on even with the belt fastened
Belt chime sounding for no reason
Light not coming on with the belt unfastened
Airbag light also on in some cars

Common causes

Dirty or worn contact in the buckle
Corroded or loose connector under the seat
Switch wire damaged by seat movement
Faulty buckle
Fault in the module reading the signal

What to do

Check that the buckle has no dirt or coins inside and that the connector under the seat is firmly plugged in. Since it concerns the seat belt, have it checked soon: the warning must work, and the belt should always be worn.

How to read code B1462

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1462 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1462 mean?

Seat belt switch circuit failure. Code B1462 is manufacturer-defined and I have no reliable information on how each brand uses it. The reference definition points to a general failure in the seat belt switch circuit (the contact that reports whether the belt is fastened). The module receives an inconsistent signal from this contact.

Can I keep driving with code B1462 active?

With caution: limp mode possible, have it checked soon

Common causes — B1462

Dirty or worn contact in the buckle Corroded or loose connector under the seat Switch wire damaged by seat movement Faulty buckle Fault in the module reading the signal

How do you fix code B1462?

Check that the buckle has no dirt or coins inside and that the connector under the seat is firmly plugged in. Since it concerns the seat belt, have it checked soon: the warning must work, and the belt should always be worn.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes