B1502 — Left turn signal lamp circuit short to ground
| Meaning | The control module has detected that the left turn signal circuit is connected to ground when it should not be. This code is manufacturer-defined and may refer to one or more left-side lamps. Current goes straight to ground and the signals cannot work properly. |
| Family | Body (B) |
Typical symptoms
Fuse or circuit protection tripping
Left signal dim or not flashing
Dashboard indicator behaving abnormally
Problem appearing after washing, rain or impacts
Common causes
Wet or corroded bulb socket or connector
Damaged wiring near the light unit or bumper
Bulb or socket with an internal short
Damaged output stage in the body control module
What to do
How to read code B1502
This is an informational entry: it normally does not limit how the vehicle works.
The code B1502 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1502 mean?
Left turn signal lamp circuit short to ground. The control module has detected that the left turn signal circuit is connected to ground when it should not be. This code is manufacturer-defined and may refer to one or more left-side lamps. Current goes straight to ground and the signals cannot work properly.
Can I keep driving with code B1502 active?
With caution: limp mode possible, have it checked soon
Common causes — B1502
Left lamp wire pinched against the bodywork Wet or corroded bulb socket or connector Damaged wiring near the light unit or bumper Bulb or socket with an internal short Damaged output stage in the body control module
How do you fix code B1502?
Check the left-side wiring and sockets for bare wires or spots where a wire rubs on the body, and look for moisture inside the lights. Have it repaired right away, because without signals you are not road legal and a prolonged short can damage the module.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1501 — Left turn signal lamp circuit short to battery
- Next code: B1503 — Right turn signal lamp circuit failure
Related codes
- B1500 — Left turn signal lamp circuit open
- B1501 — Left turn signal lamp circuit short to battery
- B1503 — Right turn signal lamp circuit failure
- B1504 — Right turn signal lamp circuit open
- B1505 — Right turn signal lamp circuit short to battery
- B1506 — Right turn signal lamp circuit short to ground
- B1507 — Flash-to-pass switch circuit failure
- B1508 — Flash-to-pass switch circuit open
- B1509 — Flash-to-pass switch circuit short to battery
- B1510 — Flash-to-pass switch circuit short to ground
- B1511 — Driver door handle circuit failure
- B1512 — Driver door handle circuit open