Skip to content
Fault code dictionary (DTC)

B1503 — Right turn signal lamp circuit failure

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module has detected a general fault in the right turn signal lamp circuit, without saying whether it is an open wire or a short. This code is manufacturer-defined and the detail can vary by model. The right signals may not work, or may flash abnormally or at a different rate.
FamilyBody (B)

Typical symptoms

Right turn signal off or dim
Faster than normal flashing on the right side
Dashboard indicator behaving oddly
Signals working intermittently
Bulb failure message on the dashboard

Common causes

Burnt-out or incorrect type of right-side bulb
Corroded bulb socket or poor contact
Damaged right-side wiring or connector with moisture
Poor ground connection near the light unit
Faulty body control module or flasher relay

What to do

Start with the right turn signal bulbs, front, rear and side, and their sockets. Turn signals are a safety and legal requirement, so get this fixed before carrying on with normal use.

How to read code B1503

This is an informational entry: it normally does not limit how the vehicle works.

The code B1503 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1503 mean?

Right turn signal lamp circuit failure. The control module has detected a general fault in the right turn signal lamp circuit, without saying whether it is an open wire or a short. This code is manufacturer-defined and the detail can vary by model. The right signals may not work, or may flash abnormally or at a different rate.

Can I keep driving with code B1503 active?

With caution: limp mode possible, have it checked soon

Common causes — B1503

Burnt-out or incorrect type of right-side bulb Corroded bulb socket or poor contact Damaged right-side wiring or connector with moisture Poor ground connection near the light unit Faulty body control module or flasher relay

How do you fix code B1503?

Start with the right turn signal bulbs, front, rear and side, and their sockets. Turn signals are a safety and legal requirement, so get this fixed before carrying on with normal use.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes