B1725 — Driver seat rear up switch circuit fault
| Meaning | The body control module has detected a general fault in the circuit of the switch that raises the rear of the driver's seat. The code is manufacturer-defined and I can't give a more precise meaning without knowing the brand. The switch signal does not match what is expected. |
| Family | Body (B) |
Typical symptoms
The seat adjusts in some directions only
Rear raising is intermittent
The seat stays in an unwanted position
Possible body warning light or message, depending on the model
Common causes
Loose or corroded connector under the seat
Wire damaged by the seat movements
Liquid spilled on the switch pack
Faulty comfort or seat control module (uncommon)
What to do
How to read code B1725
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1725 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1725 mean?
Driver seat rear up switch circuit fault. The body control module has detected a general fault in the circuit of the switch that raises the rear of the driver's seat. The code is manufacturer-defined and I can't give a more precise meaning without knowing the brand. The switch signal does not match what is expected.
Can I keep driving with code B1725 active?
With caution: limp mode possible, have it checked soon
Common causes — B1725
Worn or dirty seat switch pack Loose or corroded connector under the seat Wire damaged by the seat movements Liquid spilled on the switch pack Faulty comfort or seat control module (uncommon)
How do you fix code B1725?
Check whether the control works and whether the other movements are normal, then have the connectors and wiring under the seat inspected. It won't stop the car, but it is worth fixing to keep a correct driving position.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1724 — Driver seat rearward switch circuit shorted to gro...
- Next code: B1726 — Driver seat rear up switch circuit open
Related codes
- B1700 — Passenger seatbelt tension reducer circuit short to ground
- B1701 — Driver seat recline forward switch circuit failure
- B1702 — Driver seat recline forward switch circuit open
- B1703 — Driver seat recline forward switch circuit short to battery
- B1704 — Driver seat recline forward switch circuit short to ground
- B1705 — Driver seat recline rearward switch circuit failure
- B1706 — Driver seat recline rearward switch circuit open
- B1707 — Driver seat recline rearward switch circuit short to battery
- B1708 — Driver seat recline rearward switch circuit short to ground
- B1709 — Driver seat front up switch circuit failure
- B1710 — Driver seat front up switch circuit open
- B1711 — Driver seat front up switch circuit short to battery