Skip to content
Fault code dictionary (DTC)

B1726 — Driver seat rear up switch circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module has detected that the circuit of the switch that raises the rear of the driver's seat is open, meaning the electrical connection is broken somewhere. The code is manufacturer-defined and details vary by brand. When you press the control, the module receives no signal.
FamilyBody (B)

Typical symptoms

The rear of the seat does not rise
The other seat movements work
The control works only now and then
No motor noise when pressing the control
Possible body warning light or message, depending on the model

Common causes

Connector under the seat unplugged or corroded
Wire broken by the wear of the seat movements
Worn internal contact in the switch
Loose terminal inside the connector
Seat control module problem (uncommon)

What to do

Check whether the seat responds to the other controls and inspect the connector under the seat with the car off. An open circuit almost always comes from a contact or a wire. It is not urgent for driving, but it should be fixed so you can adjust your driving position.

How to read code B1726

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1726 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1726 mean?

Driver seat rear up switch circuit open. The control module has detected that the circuit of the switch that raises the rear of the driver's seat is open, meaning the electrical connection is broken somewhere. The code is manufacturer-defined and details vary by brand. When you press the control, the module receives no signal.

Can I keep driving with code B1726 active?

With caution: limp mode possible, have it checked soon

Common causes — B1726

Connector under the seat unplugged or corroded Wire broken by the wear of the seat movements Worn internal contact in the switch Loose terminal inside the connector Seat control module problem (uncommon)

How do you fix code B1726?

Check whether the seat responds to the other controls and inspect the connector under the seat with the car off. An open circuit almost always comes from a contact or a wire. It is not urgent for driving, but it should be fixed so you can adjust your driving position.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes