Skip to content
Fault code dictionary (DTC)

B1758 — Driver seat rear down circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that the circuit driving the rear of the driver's seat downward is open, meaning broken: current is not reaching the motor. The code is manufacturer-defined and exact details can vary by make.
FamilyBody (B)

Typical symptoms

The rear of the seat does not lower
No motor sound when you press the control
Other seat movements work
Recall of the saved position does not complete
The fault comes and goes as you move the seat

Common causes

Broken wire in the harness under the seat
Unplugged connector or corroded contacts
Adjustment motor with a broken winding
Faulty adjustment switch
Damaged terminal in the module connector

What to do

Check the connector under the seat and the section of harness that bends during adjustment: that is where wires break most often. There is no driving risk, so urgency is low. Avoid forcing the seat by hand on its rails.

How to read code B1758

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1758 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1758 mean?

Driver seat rear down circuit open. The control unit has detected that the circuit driving the rear of the driver's seat downward is open, meaning broken: current is not reaching the motor. The code is manufacturer-defined and exact details can vary by make.

Can I keep driving with code B1758 active?

With caution: limp mode possible, have it checked soon

Common causes — B1758

Broken wire in the harness under the seat Unplugged connector or corroded contacts Adjustment motor with a broken winding Faulty adjustment switch Damaged terminal in the module connector

How do you fix code B1758?

Check the connector under the seat and the section of harness that bends during adjustment: that is where wires break most often. There is no driving risk, so urgency is low. Avoid forcing the seat by hand on its rails.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes