Skip to content
Fault code dictionary (DTC)

B1759 — Driver seat rear down circuit shorted to battery

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected battery voltage where it should not be on the driver's seat rear-down circuit. The circuit is touching a live supply. The code is manufacturer-defined and exact details vary by make.
FamilyBody (B)

Typical symptoms

The seat moves on its own or does not stop
The rear of the seat stays down and will not rise
The seat fuse blows
The seat motor gets hot or sounds strained
Inconsistent seat controls

Common causes

Wire with worn insulation touching another live wire
Harness pinched by the seat rails
Switch with stuck contacts
Water or moisture in the connector under the seat
Faulty control module

What to do

If the seat moves without a command, disconnect the battery or the seat fuse and have it checked soon, because a motor under constant power can overheat. Inspect the harness under the seat for worn or pinched insulation.

How to read code B1759

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1759 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1759 mean?

Driver seat rear down circuit shorted to battery. The control unit has detected battery voltage where it should not be on the driver's seat rear-down circuit. The circuit is touching a live supply. The code is manufacturer-defined and exact details vary by make.

Can I keep driving with code B1759 active?

With caution: limp mode possible, have it checked soon

Common causes — B1759

Wire with worn insulation touching another live wire Harness pinched by the seat rails Switch with stuck contacts Water or moisture in the connector under the seat Faulty control module

How do you fix code B1759?

If the seat moves without a command, disconnect the battery or the seat fuse and have it checked soon, because a motor under constant power can overheat. Inspect the harness under the seat for worn or pinched insulation.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes