B1760 — Driver seat rear down circuit shorted to ground
| Meaning | The control unit has detected that the driver's seat rear-down circuit is touching ground, meaning the body or a negative line. The code is manufacturer-defined and the precise meaning can change by make. |
| Family | Body (B) |
Typical symptoms
The seat fuse blows when you try the control
The seat does not respond or stops halfway
Other seat movements slow or absent
A faint burning smell under the seat in worse cases
Common causes
Harness pinched by the rails
Motor with a shorted winding
Moisture or corrosion in the connector
Faulty control module
What to do
How to read code B1760
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1760 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1760 mean?
Driver seat rear down circuit shorted to ground. The control unit has detected that the driver's seat rear-down circuit is touching ground, meaning the body or a negative line. The code is manufacturer-defined and the precise meaning can change by make.
Can I keep driving with code B1760 active?
With caution: limp mode possible, have it checked soon
Common causes — B1760
Wire with damaged insulation resting on the seat's metal frame Harness pinched by the rails Motor with a shorted winding Moisture or corrosion in the connector Faulty control module
How do you fix code B1760?
Do not keep pressing the control if the fuse blows, because repeated attempts can damage the wiring. Check the wire routing under the seat and the condition of the connectors. Urgency is low, but do not ignore a burning smell.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1759 — Driver seat rear down circuit shorted to battery
- Next code: B1761 — Driver seat front down circuit fault
Related codes
- B1700 — Passenger seatbelt tension reducer circuit short to ground
- B1701 — Driver seat recline forward switch circuit failure
- B1702 — Driver seat recline forward switch circuit open
- B1703 — Driver seat recline forward switch circuit short to battery
- B1704 — Driver seat recline forward switch circuit short to ground
- B1705 — Driver seat recline rearward switch circuit failure
- B1706 — Driver seat recline rearward switch circuit open
- B1707 — Driver seat recline rearward switch circuit short to battery
- B1708 — Driver seat recline rearward switch circuit short to ground
- B1709 — Driver seat front up switch circuit failure
- B1710 — Driver seat front up switch circuit open
- B1711 — Driver seat front up switch circuit short to battery