Skip to content
Fault code dictionary (DTC)

B2301 — Passenger seat memory position error

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis code is manufacturer-defined and I have no reliable information on how each make uses it. According to the reference definition, the passenger seat position saved in memory does not match what the sensors read, or it was not reached. The module cannot return the seat to the requested position.
FamilyBody (B)

Typical symptoms

Passenger seat does not reach the memorized position
Seat stops partway
Memory button produces no movement
Saved positions are lost
Jerky or slow movement

Common causes

Memory needs resaving after the battery was disconnected
Dirty or faulty position sensor
Objects stuck under or behind the seat
Worn seat motor or track
Loose connector under the seat
Seat module fault, which is rare

What to do

Look under and behind the seat for objects blocking its travel, then reprogram the position following the manual. It is not urgent, but if the seat moves without being commanded, have it checked right away.

How to read code B2301

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B2301 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B2301 mean?

Passenger seat memory position error. This code is manufacturer-defined and I have no reliable information on how each make uses it. According to the reference definition, the passenger seat position saved in memory does not match what the sensors read, or it was not reached. The module cannot return the seat to the requested position.

Can I keep driving with code B2301 active?

With caution: limp mode possible, have it checked soon

Common causes — B2301

Memory needs resaving after the battery was disconnected Dirty or faulty position sensor Objects stuck under or behind the seat Worn seat motor or track Loose connector under the seat Seat module fault, which is rare

How do you fix code B2301?

Look under and behind the seat for objects blocking its travel, then reprogram the position following the manual. It is not urgent, but if the seat moves without being commanded, have it checked right away.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes