B2315 — Passenger mirror horizontal sensor circuit shorted to ground
| Meaning | The control module has detected too low a voltage on the circuit of the passenger mirror's horizontal position sensor, as if the wire were touching the car body ground. The code is manufacturer-defined and details can vary by brand. The position signal can't be trusted. |
| Family | Body (B) |
Typical symptoms
Irregular movement or sudden stop of the mirror
Mirror memory positions not working
Motor running without the mirror moving as it should
Mirror not tilting in reverse, if equipped
Common causes
Moisture or corrosion in the mirror connector
Wiring pinched or crushed inside the door
Faulty internal potentiometer
Faulty mirror assembly or control module, less common
What to do
How to read code B2315
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2315 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2315 mean?
Passenger mirror horizontal sensor circuit shorted to ground. The control module has detected too low a voltage on the circuit of the passenger mirror's horizontal position sensor, as if the wire were touching the car body ground. The code is manufacturer-defined and details can vary by brand. The position signal can't be trusted.
Can I keep driving with code B2315 active?
With caution: limp mode possible, have it checked soon
Common causes — B2315
Wire with worn insulation touching the body Moisture or corrosion in the mirror connector Wiring pinched or crushed inside the door Faulty internal potentiometer Faulty mirror assembly or control module, less common
How do you fix code B2315?
Inspect the mirror wiring, especially where it runs through the door boot and near the door sheet metal, and check the connector. It won't stop the car, but a mirror you can't adjust reduces your view, so don't put the check off for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2314 — Passenger mirror horizontal sensor circuit shorted...
- Next code: B2316 — Passenger mirror vertical position sensor circuit...
Related codes
- B2300 — Driver seat memory position error
- B2301 — Passenger seat memory position error
- B2302 — Seat headrest feedback potentiometer circuit failure
- B2303 — Seat headrest feedback potentiometer circuit open
- B2304 — Seat headrest potentiometer circuit short to battery
- B2305 — Seat headrest potentiometer circuit short to ground
- B2306 — Seat headrest motor stalled
- B2310 — Driver mirror memory position error
- B2311 — Passenger mirror memory position error
- B2312 — Passenger mirror horizontal position sensor circuit fault
- B2313 — Passenger mirror horizontal position sensor circuit open
- B2314 — Passenger mirror horizontal sensor circuit shorted to batter...