B2313 — Passenger mirror horizontal position sensor circuit open
| Meaning | The control module has detected an open circuit in the sensor that reports the horizontal position of the passenger mirror. In plain terms, the connection is broken and the signal isn't getting through. The code is manufacturer-defined and details can vary by brand. It is usually a broken wire or a contact that no longer closes. |
| Family | Body (B) |
Typical symptoms
The mirror works up and down but not left and right
Stored mirror positions are not recalled
Jerky movement or sudden stop of the mirror
Mirror stuck after many door openings and closings
Common causes
Disconnected or corroded connector
Worn or broken track in the potentiometer
Terminal pushed out of the connector
Faulty mirror assembly
What to do
How to read code B2313
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2313 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2313 mean?
Passenger mirror horizontal position sensor circuit open. The control module has detected an open circuit in the sensor that reports the horizontal position of the passenger mirror. In plain terms, the connection is broken and the signal isn't getting through. The code is manufacturer-defined and details can vary by brand. It is usually a broken wire or a contact that no longer closes.
Can I keep driving with code B2313 active?
With caution: limp mode possible, have it checked soon
Common causes — B2313
Broken wire in the door boot between door and pillar, from repeated flexing Disconnected or corroded connector Worn or broken track in the potentiometer Terminal pushed out of the connector Faulty mirror assembly
How do you fix code B2313?
Check the mirror connector and the stretch of wiring running through the door boot, which is where wires break most often. It isn't a safety emergency right away, but driving with a badly set mirror is awkward and risky, so get it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2312 — Passenger mirror horizontal position sensor circui...
- Next code: B2314 — Passenger mirror horizontal sensor circuit shorted...
Related codes
- B2300 — Driver seat memory position error
- B2301 — Passenger seat memory position error
- B2302 — Seat headrest feedback potentiometer circuit failure
- B2303 — Seat headrest feedback potentiometer circuit open
- B2304 — Seat headrest potentiometer circuit short to battery
- B2305 — Seat headrest potentiometer circuit short to ground
- B2306 — Seat headrest motor stalled
- B2310 — Driver mirror memory position error
- B2311 — Passenger mirror memory position error
- B2312 — Passenger mirror horizontal position sensor circuit fault
- B2314 — Passenger mirror horizontal sensor circuit shorted to batter...
- B2315 — Passenger mirror horizontal sensor circuit shorted to ground