B2329 — Steering column reach position sensor circuit open
| Meaning | The control module has detected an open circuit in the sensor that reports the reach position of the steering column: the connection is broken and the signal isn't arriving. The code is manufacturer-defined and details can vary by brand. It is often a disconnected wire or a contact that no longer closes. |
| Family | Body (B) |
Typical symptoms
Height adjustment works but reach adjustment does not
Stored steering wheel positions are not recalled
Jerky movement or sudden stop of the column
A fault message on the dash, on some models
Common causes
Broken wire in the harness near the column
Worn potentiometer track
Terminal pushed out of the connector
Faulty column adjustment assembly
What to do
How to read code B2329
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2329 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2329 mean?
Steering column reach position sensor circuit open. The control module has detected an open circuit in the sensor that reports the reach position of the steering column: the connection is broken and the signal isn't arriving. The code is manufacturer-defined and details can vary by brand. It is often a disconnected wire or a contact that no longer closes.
Can I keep driving with code B2329 active?
With caution: limp mode possible, have it checked soon
Common causes — B2329
Disconnected or corroded connector under the dash Broken wire in the harness near the column Worn potentiometer track Terminal pushed out of the connector Faulty column adjustment assembly
How do you fix code B2329?
Check the connector and wiring near the column under the dash, looking for loose contacts. It won't stop the car, but if the wheel is stuck in an uncomfortable position, have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2328 — Steering column reach position sensor circuit faul...
- Next code: B2330 — Steering column reach sensor circuit shorted to ba...
Related codes
- B2300 — Driver seat memory position error
- B2301 — Passenger seat memory position error
- B2302 — Seat headrest feedback potentiometer circuit failure
- B2303 — Seat headrest feedback potentiometer circuit open
- B2304 — Seat headrest potentiometer circuit short to battery
- B2305 — Seat headrest potentiometer circuit short to ground
- B2306 — Seat headrest motor stalled
- B2310 — Driver mirror memory position error
- B2311 — Passenger mirror memory position error
- B2312 — Passenger mirror horizontal position sensor circuit fault
- B2313 — Passenger mirror horizontal position sensor circuit open
- B2314 — Passenger mirror horizontal sensor circuit shorted to batter...