B2380 — Heater coolant temperature sensor circuit short to ground
| Meaning | The module detected that the circuit of the sensor measuring heater coolant temperature is touching ground. This is a manufacturer-defined code: the meaning given is the most common one and may vary by brand. The module is not getting a reliable temperature value. |
| Family | Body (B) |
Typical symptoms
Warm air arrives too late or not at all
Automatic climate control behaves oddly
The fan may run inconsistently
Common causes
Sensor wiring pinched to ground
Damp or corroded sensor connector
Coolant leaks wetting the connector
Faulty climate control module
What to do
How to read code B2380
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2380 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2380 mean?
Heater coolant temperature sensor circuit short to ground. The module detected that the circuit of the sensor measuring heater coolant temperature is touching ground. This is a manufacturer-defined code: the meaning given is the most common one and may vary by brand. The module is not getting a reliable temperature value.
Can I keep driving with code B2380 active?
With caution: limp mode possible, have it checked soon
Common causes — B2380
Faulty temperature sensor Sensor wiring pinched to ground Damp or corroded sensor connector Coolant leaks wetting the connector Faulty climate control module
How do you fix code B2380?
Check the sensor connector and wiring and look for traces of coolant. It is not urgent for driving, but check the engine coolant level if you also notice leaks.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2374 — Power sliding door detent (latch) circuit failure
- Next code: B2381 — Heater coolant temperature sensor circuit open
Related codes
- B2300 — Driver seat memory position error
- B2301 — Passenger seat memory position error
- B2302 — Seat headrest feedback potentiometer circuit failure
- B2303 — Seat headrest feedback potentiometer circuit open
- B2304 — Seat headrest potentiometer circuit short to battery
- B2305 — Seat headrest potentiometer circuit short to ground
- B2306 — Seat headrest motor stalled
- B2310 — Driver mirror memory position error
- B2311 — Passenger mirror memory position error
- B2312 — Passenger mirror horizontal position sensor circuit fault
- B2313 — Passenger mirror horizontal position sensor circuit open
- B2314 — Passenger mirror horizontal sensor circuit shorted to batter...