Skip to content
Fault code dictionary (DTC)

C1115 — ABS power relay output short circuit to battery

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis code is defined by the manufacturer, and the meaning can change by brand. It generally means the ABS control unit sees voltage on the power relay output when there shouldn't be any, as if it were connected straight to positive. The relay may be stuck closed or there is an abnormal contact in the wiring.
FamilyChassis (C)

Typical symptoms

ABS warning light on
Traction or stability control light on
ABS disabled
ABS pump running or buzzing even with the ignition off
Flat battery after parking

Common causes

Relay with stuck contacts
Output cable touching another power line
Damaged or moist connector
Internal fault in the pump or valves
Internal fault in the ABS control unit

What to do

Have the relay and output wiring checked, and if the battery drains while parked, tell whoever does the diagnosis. Normal brakes usually work, but ABS and stability control won't, so get it checked soon.

How to read code C1115

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1115 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1115 mean?

ABS power relay output short circuit to battery. This code is defined by the manufacturer, and the meaning can change by brand. It generally means the ABS control unit sees voltage on the power relay output when there shouldn't be any, as if it were connected straight to positive. The relay may be stuck closed or there is an abnormal contact in the wiring.

Can I keep driving with code C1115 active?

With caution: limp mode possible, have it checked soon

Common causes — C1115

Relay with stuck contacts Output cable touching another power line Damaged or moist connector Internal fault in the pump or valves Internal fault in the ABS control unit

How do you fix code C1115?

Have the relay and output wiring checked, and if the battery drains while parked, tell whoever does the diagnosis. Normal brakes usually work, but ABS and stability control won't, so get it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes