C1123 — Vehicle speed sensor input shorted to battery voltage
| Meaning | This code is defined by the manufacturer, and the meaning can change by brand. It generally means the control unit sees too high a voltage on the vehicle speed signal input, as if the wire were touching positive. Without a valid speed, the ABS, transmission and speedometer can work badly. |
| Family | Chassis (C) |
Typical symptoms
ABS light on
Traction control light on
Automatic transmission shifting oddly
Cruise control not working
Common causes
Corroded or water-damaged connector
Faulty speed sensor
Wiring damaged by rubbing
Internal control unit fault
What to do
How to read code C1123
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1123 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1123 mean?
Vehicle speed sensor input shorted to battery voltage. This code is defined by the manufacturer, and the meaning can change by brand. It generally means the control unit sees too high a voltage on the vehicle speed signal input, as if the wire were touching positive. Without a valid speed, the ABS, transmission and speedometer can work badly.
Can I keep driving with code C1123 active?
With caution: limp mode possible, have it checked soon
Common causes — C1123
Speed sensor wire touching positive Corroded or water-damaged connector Faulty speed sensor Wiring damaged by rubbing Internal control unit fault
How do you fix code C1123?
Have the speed sensor connector and wiring checked first, then the sensor itself. You can usually drive, but ABS and the transmission may be limited and the speedometer unreliable, so get it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1117 — Engine speed (RPM) input circuit failure
- Next code: C1124 — Transmission input shaft speed signal missing or f...
Related codes
- C1100 — ABS pump switch circuit fault
- C1101 — ABS hydraulic valve circuit fault
- C1102 — ABS acceleration switch circuit fault
- C1103 — ABS brake switch circuit fault
- C1104 — Traction control active lamp circuit shorted to battery
- C1105 — Traction control disable lamp circuit shorted to battery
- C1106 — Traction control disable switch circuit shorted to battery
- C1107 — ABS function enabled input circuit fault
- C1109 — Speed control actuator cable release failure
- C1110 — ABS power relay coil circuit failure
- C1111 — ABS power relay coil open circuit
- C1112 — ABS power relay coil short circuit to ground