Skip to content
Fault code dictionary (DTC)

C1288 — Pressure transducer primary input: circuit failure

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis is a manufacturer-defined code, so details vary by brand. The module is not getting a valid signal from the main transducer that measures pressure in the braking system. Without it, the system cannot manage braking, ABS and stability precisely.
FamilyChassis (C)

Typical symptoms

Brake and/or ABS warning light on
Stability control limited
Brake pedal feeling different
Brake fault message
Braking harder to modulate

Common causes

Corroded or loose transducer connector
Damaged wiring
Faulty pressure transducer
Brake fluid leak
Faulty module or hydraulic unit

What to do

Check the brake fluid level, and the transducer connector and wiring. If you notice a soft pedal or unusual braking, do not drive and have it checked right away.

How to read code C1288

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1288 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1288 mean?

Pressure transducer primary input: circuit failure. This is a manufacturer-defined code, so details vary by brand. The module is not getting a valid signal from the main transducer that measures pressure in the braking system. Without it, the system cannot manage braking, ABS and stability precisely.

Can I keep driving with code C1288 active?

With caution: limp mode possible, have it checked soon

Common causes — C1288

Corroded or loose transducer connector Damaged wiring Faulty pressure transducer Brake fluid leak Faulty module or hydraulic unit

How do you fix code C1288?

Check the brake fluid level, and the transducer connector and wiring. If you notice a soft pedal or unusual braking, do not drive and have it checked right away.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes