Skip to content
Fault code dictionary (DTC)

P060C — Internal control module main processor fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a problem in its main processor, the one that runs the engine management program. An error here can affect every function. The code alone does not tell whether the cause is inside or outside the control unit.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Engine will not start or stalls
Limp mode with reduced power
Unpredictable engine behavior
Several warning lights at once

Common causes

Unstable or insufficient supply voltage
Deteriorated grounds
Software error
Moisture getting into the control unit
Internal failure of the control unit

What to do

Start with the battery, terminals and grounds, the easiest causes to check. After that the control unit and its software need a proper diagnosis. If the engine stalls or goes into limp mode, avoid driving.

How to read code P060C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P060C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (0C) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P060C mean?

Internal control module main processor fault. The control unit detected a problem in its main processor, the one that runs the engine management program. An error here can affect every function. The code alone does not tell whether the cause is inside or outside the control unit.

Can I keep driving with code P060C active?

With caution: limp mode possible, have it checked soon

Common causes — P060C

Unstable or insufficient supply voltage Deteriorated grounds Software error Moisture getting into the control unit Internal failure of the control unit

How do you fix code P060C?

Start with the battery, terminals and grounds, the easiest causes to check. After that the control unit and its software need a proper diagnosis. If the engine stalls or goes into limp mode, avoid driving.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes