P06E5 — Glow plug control module 1: performance fault
| Meaning | The module that controls the pre-heating glow plugs of diesel engines is not working as expected, according to the control unit's internal checks. The code is generic: it does not say which part of the module or which glow plug is involved. Other codes and live data from the scan tool are needed to understand the fault. |
| Family | Powertrain (P) |
Typical symptoms
Hard starting when cold
White or grey smoke at start-up
Uneven running in the first minutes
Glow plugs staying on too briefly or too long
Common causes
Weak or unstable module supply
Corroded module connectors or grounds
Damaged glow plug wiring
Internal fault in the glow plug module
What to do
How to read code P06E5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P06E5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (E5) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P06E5 mean?
Glow plug control module 1: performance fault. The module that controls the pre-heating glow plugs of diesel engines is not working as expected, according to the control unit's internal checks. The code is generic: it does not say which part of the module or which glow plug is involved. Other codes and live data from the scan tool are needed to understand the fault.
Can I keep driving with code P06E5 active?
With caution: limp mode possible, have it checked soon
Common causes — P06E5
One or more worn or shorted glow plugs Weak or unstable module supply Corroded module connectors or grounds Damaged glow plug wiring Internal fault in the glow plug module
How do you fix code P06E5?
First check the battery, supply and grounds of the module, then the resistance of each glow plug and the condition of the wiring. In cold weather starting problems can increase, so it is better not to wait too long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P06E4 — Control module wake-up circuit: performance fault
- Next code: P06E6 — Sensor power supply C: open circuit
Related codes
- P0600 — Serial communication link malfunction
- P0601 — Internal Control Module Memory Check Sum Error
- P0602 — Control module programming error
- P0603 — Internal Control Module Keep Alive Memory (KAM) Error
- P0604 — Internal control module RAM error
- P0605 — Internal Control Module Read Only Memory (ROM) Error
- P0606 — Control module processor fault
- P0607 — Control module performance out of range
- P0608 — Control module speed signal output A malfunction
- P0609 — Control module speed signal output B malfunction
- P060A — Internal control module monitoring processor fault
- P060B — Internal control module A/D conversion fault