P06F1 — AdBlue control module internal temperature sensor implausible
| Meaning | The AdBlue system control unit found that the temperature read by the internal sensor is not plausible, for example it does not change or differs from what is expected. The sensor responds, but the data does not look reliable. |
| Family | Powertrain (P) |
Typical symptoms
Warning about the AdBlue system
Irregular AdBlue dosing
Possible reduction in power
Higher than normal emissions
Common causes
Internal fault in the control module
Corroded contacts or wiring with abnormal resistance
Excessive heat at the mounting location
Power supply or ground problem
What to do
How to read code P06F1
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P06F1 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (F1) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P06F1 mean?
AdBlue control module internal temperature sensor implausible. The AdBlue system control unit found that the temperature read by the internal sensor is not plausible, for example it does not change or differs from what is expected. The sensor responds, but the data does not look reliable.
Can I keep driving with code P06F1 active?
With caution: limp mode possible, have it checked soon
Common causes — P06F1
Internal sensor of the module out of calibration or faulty Internal fault in the control module Corroded contacts or wiring with abnormal resistance Excessive heat at the mounting location Power supply or ground problem
How do you fix code P06F1?
Have the module data read with a diagnostic tool and the wiring and connectors checked. Don't neglect it for long, because the AdBlue system may not work correctly.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P06F0 — AdBlue control module internal temperature sensor...
- Next code: P06F2 — AdBlue control module internal temperature sensor...
Related codes
- P0600 — Serial communication link malfunction
- P0601 — Internal Control Module Memory Check Sum Error
- P0602 — Control module programming error
- P0603 — Internal Control Module Keep Alive Memory (KAM) Error
- P0604 — Internal control module RAM error
- P0605 — Internal Control Module Read Only Memory (ROM) Error
- P0606 — Control module processor fault
- P0607 — Control module performance out of range
- P0608 — Control module speed signal output A malfunction
- P0609 — Control module speed signal output B malfunction
- P060A — Internal control module monitoring processor fault
- P060B — Internal control module A/D conversion fault