P06F4 — Stop-Start mode lamp control circuit fault
| Meaning | The control unit detected a problem in the circuit that controls the Stop-Start mode lamp, the light that shows whether the automatic shutdown system is active. The fault concerns the indication and not necessarily the operation of the system. |
| Family | Powertrain (P) |
Typical symptoms
Check engine light on
Stop-Start system behaves oddly
Other warnings on the dashboard
Sometimes no symptom besides the light
Common causes
Damaged wiring or connector in the lamp circuit
Fault in the instrument cluster
Problem in the control unit driving the lamp
Corroded contacts
What to do
How to read code P06F4
This is an informational entry: it normally does not limit how the vehicle works.
The code P06F4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (F4) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P06F4 mean?
Stop-Start mode lamp control circuit fault. The control unit detected a problem in the circuit that controls the Stop-Start mode lamp, the light that shows whether the automatic shutdown system is active. The fault concerns the indication and not necessarily the operation of the system.
Can I keep driving with code P06F4 active?
With caution: limp mode possible, have it checked soon
Common causes — P06F4
Faulty bulb or LED in the lamp Damaged wiring or connector in the lamp circuit Fault in the instrument cluster Problem in the control unit driving the lamp Corroded contacts
How do you fix code P06F4?
Have the lamp circuit and the instrument cluster checked. It is not usually an urgent fault, but it is worth verifying because you may not be warned about the state of the system.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P06F3 — AdBlue control module internal temperature sensor...
- Next code: P06F5 — Glow plug control module 2 fault
Related codes
- P0600 — Serial communication link malfunction
- P0601 — Internal Control Module Memory Check Sum Error
- P0602 — Control module programming error
- P0603 — Internal Control Module Keep Alive Memory (KAM) Error
- P0604 — Internal control module RAM error
- P0605 — Internal Control Module Read Only Memory (ROM) Error
- P0606 — Control module processor fault
- P0607 — Control module performance out of range
- P0608 — Control module speed signal output A malfunction
- P0609 — Control module speed signal output B malfunction
- P060A — Internal control module monitoring processor fault
- P060B — Internal control module A/D conversion fault