Skip to content
Fault code dictionary (DTC)

P06F5 — Glow plug control module 2 fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a fault in the second glow plug control module, the device that powers the preheating glow plugs on diesel engines. This code is generic: it names the module without specifying the type of fault, which is usually clarified by other codes.
FamilyPowertrain (P)

Typical symptoms

Hard starting when cold
White or gray smoke at start-up
Rough running in the first minutes
Glow plug light or check engine light on
More noise than normal when cold

Common causes

Internal fault in the glow plug module
Worn or shorted glow plugs
Damaged wiring or connectors
Insufficient power supply or grounds
Communication problem with the engine control unit

What to do

Have the other associated codes read and the module power supply and wiring checked. In summer you may not notice it, but in cold weather starting can become difficult: better to act beforehand.

How to read code P06F5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P06F5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (F5) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P06F5 mean?

Glow plug control module 2 fault. The control unit detected a fault in the second glow plug control module, the device that powers the preheating glow plugs on diesel engines. This code is generic: it names the module without specifying the type of fault, which is usually clarified by other codes.

Can I keep driving with code P06F5 active?

With caution: limp mode possible, have it checked soon

Common causes — P06F5

Internal fault in the glow plug module Worn or shorted glow plugs Damaged wiring or connectors Insufficient power supply or grounds Communication problem with the engine control unit

How do you fix code P06F5?

Have the other associated codes read and the module power supply and wiring checked. In summer you may not notice it, but in cold weather starting can become difficult: better to act beforehand.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes