Skip to content
Fault code dictionary (DTC)

P0D08 — Charging positive contactor A stuck closed

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit commanded the charging positive contactor A to open, but it stayed closed. The battery's positive terminal therefore stays connected to the charging system when it should be isolated. This is an electrical safety issue.
FamilyPowertrain (P)

Typical symptoms

Warning light for the hybrid/electric system
Charging blocked or car that will not start
High-voltage check message
Reduced power
Often no noticeable symptom except the warning light

Common causes

Contactor contacts welded by wear or overloads
Faulty contactor
Contactor control that does not release
Fault in the battery control unit
Damage to the high-voltage circuit after an impact or water intrusion

What to do

Take this seriously: have the car checked without waiting and do not try to work on the orange cables. If high-voltage warnings or unusual smells appear, stop safely and call for assistance.

How to read code P0D08

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D08 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D08 mean?

Charging positive contactor A stuck closed. The control unit commanded the charging positive contactor A to open, but it stayed closed. The battery's positive terminal therefore stays connected to the charging system when it should be isolated. This is an electrical safety issue.

Can I keep driving with code P0D08 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D08

Contactor contacts welded by wear or overloads Faulty contactor Contactor control that does not release Fault in the battery control unit Damage to the high-voltage circuit after an impact or water intrusion

How do you fix code P0D08?

Take this seriously: have the car checked without waiting and do not try to work on the orange cables. If high-voltage warnings or unusual smells appear, stop safely and call for assistance.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes