Skip to content
Fault code dictionary (DTC)

P0D0B — Charging positive contactor A control circuit out of range

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured a signal in the charging positive contactor A control circuit that is outside the expected values, without the circuit being open or shorted. The command may not be reliable. Charging may be limited or prevented.
FamilyPowertrain (P)

Typical symptoms

Erratic charging or charging that does not start
Warning light for the hybrid/electric system
Error message about charging
Weak, delayed, or missing contactor click
Possibly reduced power

Common causes

Contactor or coil with degraded performance
Abnormal resistance in the wiring
Low or unstable supply voltage
Oxidized connector
Battery control unit with a faulty output

What to do

Check that the 12 V battery is in good condition, because low voltage can disturb the command. If the code stays, a check at a workshop qualified for high voltage is needed.

How to read code P0D0B

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D0B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D0B mean?

Charging positive contactor A control circuit out of range. The control unit measured a signal in the charging positive contactor A control circuit that is outside the expected values, without the circuit being open or shorted. The command may not be reliable. Charging may be limited or prevented.

Can I keep driving with code P0D0B active?

With caution: limp mode possible, have it checked soon

Common causes — P0D0B

Contactor or coil with degraded performance Abnormal resistance in the wiring Low or unstable supply voltage Oxidized connector Battery control unit with a faulty output

How do you fix code P0D0B?

Check that the 12 V battery is in good condition, because low voltage can disturb the command. If the code stays, a check at a workshop qualified for high voltage is needed.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes