Skip to content
Fault code dictionary (DTC)

P0E87 — Battery charger B input voltage too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured a higher voltage than the allowed maximum at the input of charger B. To protect the electronics, charging is stopped or does not start. The problem may come from the mains, the charging point or the car. Which unit is B depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Charging does not start
Charging suddenly interrupted
Charging error message
Problem only with certain sockets or charging posts

Common causes

Mains voltage too high in that area
Faulty charging post or wallbox
Unsuitable home electrical installation
Wrong charger voltage sensor
Internal charger fault

What to do

Try charging at another charging post or socket. If the problem only happens in one place, have the installation checked by an electrician. If it appears everywhere, have the car checked at a workshop.

How to read code P0E87

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E87 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E87 mean?

Battery charger B input voltage too high. The control unit measured a higher voltage than the allowed maximum at the input of charger B. To protect the electronics, charging is stopped or does not start. The problem may come from the mains, the charging point or the car. Which unit is B depends on the manufacturer.

Can I keep driving with code P0E87 active?

With caution: limp mode possible, have it checked soon

Common causes — P0E87

Mains voltage too high in that area Faulty charging post or wallbox Unsuitable home electrical installation Wrong charger voltage sensor Internal charger fault

How do you fix code P0E87?

Try charging at another charging post or socket. If the problem only happens in one place, have the installation checked by an electrician. If it appears everywhere, have the car checked at a workshop.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes