Skip to content
Fault code dictionary (DTC)

P0E8F — Drive motor A inverter: voltage sensor B signal too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a signal that is too high from voltage sensor B of the inverter for drive motor A. This often points to an open circuit or a short to the sensor's supply. Which motor is 'A' and which sensor is 'B' depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV warning light on
Reduced power
Fault message on the dashboard
Electric drive limited or unavailable
Hard system start-up

Common causes

Sensor wiring broken or shorted to supply
Damaged connector
Faulty voltage sensor
Internal inverter fault
Control unit problem

What to do

Don't work on the orange high-voltage components. Take the car to a workshop qualified for hybrids or EVs, which can test the wiring and sensor with the right equipment. Avoid driving if power drops suddenly.

How to read code P0E8F

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E8F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E8F mean?

Drive motor A inverter: voltage sensor B signal too high. The control unit detected a signal that is too high from voltage sensor B of the inverter for drive motor A. This often points to an open circuit or a short to the sensor's supply. Which motor is 'A' and which sensor is 'B' depends on the manufacturer.

Can I keep driving with code P0E8F active?

With caution: limp mode possible, have it checked soon

Common causes — P0E8F

Sensor wiring broken or shorted to supply Damaged connector Faulty voltage sensor Internal inverter fault Control unit problem

How do you fix code P0E8F?

Don't work on the orange high-voltage components. Take the car to a workshop qualified for hybrids or EVs, which can test the wiring and sensor with the right equipment. Avoid driving if power drops suddenly.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes