P0E90 — Drive motor A inverter: voltage sensor B signal erratic
| Meaning | The control unit saw the signal from voltage sensor B on the inverter for drive motor A drop out or fluctuate abnormally. An intermittent fault typically points to a poor connection. The exact meaning of A and B is chosen by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Sudden short losses of power
Occasional fault messages
Unexpected switches to limp mode
Problems that appear with vibration or after washing
Common causes
Chafed wiring or partly broken conductor
Sensor working only at times
Moisture in the connector
Inverter with an occasional internal fault
What to do
How to read code P0E90
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E90 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E90 mean?
Drive motor A inverter: voltage sensor B signal erratic. The control unit saw the signal from voltage sensor B on the inverter for drive motor A drop out or fluctuate abnormally. An intermittent fault typically points to a poor connection. The exact meaning of A and B is chosen by the manufacturer.
Can I keep driving with code P0E90 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E90
Connector with intermittent contact Chafed wiring or partly broken conductor Sensor working only at times Moisture in the connector Inverter with an occasional internal fault
How do you fix code P0E90?
Intermittent faults are harder to find, so tell the workshop when and how it happens. The inspection must be done by high-voltage-qualified staff. Don't ignore it, as it can get worse and leave you without drive.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E8F — Drive motor A inverter: voltage sensor B signal to...
- Next code: P0E91 — Drive motor B inverter: voltage sensor B circuit f...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high