P0E91 — Drive motor B inverter: voltage sensor B circuit fault
| Meaning | The control unit found a general fault in the circuit of voltage sensor B on the inverter for the second drive motor (B). The code doesn't say whether the signal is low, high or out of range, so live data is needed. What motor B and sensor B refer to is decided by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Fault message on the dashboard
Limited electric all-wheel drive (if fitted)
Limp mode
Common causes
Failed voltage sensor
Internal inverter problem
Irregular sensor supply
Control unit fault
What to do
How to read code P0E91
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E91 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E91 mean?
Drive motor B inverter: voltage sensor B circuit fault. The control unit found a general fault in the circuit of voltage sensor B on the inverter for the second drive motor (B). The code doesn't say whether the signal is low, high or out of range, so live data is needed. What motor B and sensor B refer to is decided by the manufacturer.
Can I keep driving with code P0E91 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E91
Faulty sensor connector or wiring Failed voltage sensor Internal inverter problem Irregular sensor supply Control unit fault
How do you fix code P0E91?
This is a high-voltage circuit: use a workshop with qualified staff, who will read the sensor data to identify the nature of the fault. Don't open the inverter or touch the orange cables. Limit use of the car until it's checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E90 — Drive motor A inverter: voltage sensor B signal er...
- Next code: P0E92 — Drive motor B inverter: voltage sensor B reading i...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high